DIES SIND IHRE AUFGABEN: Erstellung und termingerechte Bereitstellung von Zeichnungssätzen gemäß Aircraft-ProgrammplanungVerantwortung für Erstellung, Prüfung und Freigabe des Definitionsdossiers als CI/Design ResponsibleSicherstellung der Einhaltung aller relevanten Richtlinien, Normen und ProzesseKoordination technischer Schnittstellen mit Systemdesign, Produktion und weiteren FachbereichenBearbeitung und fristgerechte Umsetzung von Änderungen (z.
YOUR TASKS Lead global, interdisciplinary project teams responsible for the entire wind turbine system across engineering, production, and procurement Drive the development of full turbine platforms with a focus on complex system-level integration and Cost-of-Energy optimization Manage all phases from feasibility and system concept through detailed design, prototyping, validation, and industrialization Ensure achievement of project targets across system cost, quality, timeline, and technical performance Oversee structured project controlling using KPIs, milestone tracking, and deviation management across all system workstreams Implement effective risk and stakeholder management across global teams and interfaces Prepare decision proposals and consolidated system-level project reports for senior management while contributing to process improvements YOUR PROFILE Degree in engineering or a technically oriented field suitable for overseeing complex system development Project management certification (e.g., PMP or similar) is a strong advantage At least 5 years of experience leading large-scale, multi-disciplinary projects, ideally with full product system scope Strong adaptability and proven ability to align diverse global stakeholders across functions and cultures Excellent leadership and communication skills, with the capability to drive decisions in complex environments Hands-on, solution-oriented mindset with strong decision-making skills in dynamic project settings High intercultural awareness, fluent English skills, and willingness to travel; Spanish or German language skills are a plus Nordex adheres to a policy of equal employment opportunity.
YOUR TASKS Lead global, interdisciplinary project teams responsible for the entire wind turbine system across engineering, production, and procurement Drive the development of full turbine platforms with a focus on complex system-level integration and Cost-of-Energy optimization Manage all phases from feasibility and system concept through detailed design, prototyping, validation, and industrialization Ensure achievement of project targets across system cost, quality, timeline, and technical performance Oversee structured project controlling using KPIs, milestone tracking, and deviation management across all system workstreams Implement effective risk and stakeholder management across global teams and interfaces Prepare decision proposals and consolidated system-level project reports for senior management while contributing to process improvements YOUR PROFILE Degree in engineering or a technically oriented field suitable for overseeing complex system development Project management certification (e.g., PMP or similar) is a strong advantage At least 5 years of experience leading large-scale, multi-disciplinary projects, ideally with full product system scope Strong adaptability and proven ability to align diverse global stakeholders across functions and cultures Excellent leadership and communication skills, with the capability to drive decisions in complex environments Hands-on, solution-oriented mindset with strong decision-making skills in dynamic project settings High intercultural awareness, fluent English skills, and willingness to travel; Spanish or German language skills are a plus Nordex adheres to a policy of equal employment opportunity.
Design-Ingenieur_in im LHT-Entwicklungsbetrieb (m/w/d) Lufthansa Technik in Hamburg Willkommen bei Aviation Industry Personnel SERVICES GmbH, dem Experten für Service- und Personaldienstleistungen in der Luftfahrt.
Für unseren Kunden Lufthansa Technik am Standort Hamburg suchen wir zum nächstmöglichen Zeitpunkt einen Ingenieur Entwicklung Interieur Design (m/w/d) für einen Einsatz in der Arbeitnehmerüberlassung. Wir, die HITO High Professionals GmbH , begleiten Sie mit unserer langjährigen Erfahrung aus der Luftfahrtbranche gerne bei Ihrem beruflichen Einstieg in ein spannendes Arbeitsumfeld und freuen uns Sie kennenzulernen.
Für unseren Kunden Lufthansa Technik am Standort Hamburg suchen wir zum nächstmöglichen Zeitpunkt einen Ingenieur Entwicklung Interieur Design (m/w/d) für einen Einsatz in der Arbeitnehmerüberlassung. Wir, die HITO High Professionals GmbH , begleiten Sie mit unserer langjährigen Erfahrung aus der Luftfahrtbranche gerne bei Ihrem beruflichen Einstieg in ein spannendes Arbeitsumfeld und freuen uns Sie kennenzulernen.
Ihre Aufgaben Zentrale Schnittstelle zwischen Fertigung (Ausrüstungsmontage für Single-Aisle-Rumpfsektionen) und Design Office sowie erster Ansprechpartner für alle relevanten Themen Identifikation, Analyse, Prüfung und Bewertung designrelevanter Beanstandungen aus der Produktion Definition neuer technischer Lösungen unter Einhaltung aller Designvorschriften und Requirements Detaillierte Ausarbeitung zur Serienumsetzung (z.
What you will do Translate business challenges into scalable technical solutions, collaborating with product managers and other engineers to ensure high-quality design, planning, and delivery. Design, build, and maintain RESTful APIs (internal and external) that power fast, reliable, and frictionless backend services.
YOUR TASKS You develop impedance models for wind farms and battery energy storage systems in dq0 coordinates within a hybrid power plant setting You validate impedance models against EMT simulations and raw field measurement data You design control strategies for voltage and frequency control in hybrid power plants while considering coupling effects You perform tuning processes for PMS control loops in MATLAB/Simulink You contribute to improving impedance measurement methods and modelling workflows YOUR PROFILE You are enrolled in a Master's program in Electrical Engineering, Control Engineering, Power Systems or equivalent You have knowledge of electrical energy systems, ideally with exposure to wind energy You bring experience in MATLAB/Simulink or PSCAD, ideally including power system toolboxes You are interested in stability analysis, system modelling and control design Experience with converter control or wind farm control systems is an advantage You have programming skills in MATLAB; additional languages such as Python or C/C++ are a plus You work in a structured, analytical and self‑organized manner on complex technical topics DEINE BENEFITS Nordex bietet eine Vielzahl an attraktiven Benefits – hier findest du einen Auszug dessen, was Dich bei uns erwartet.
YOUR TASKS You develop impedance models for wind farms and battery energy storage systems in dq0 coordinates within a hybrid power plant setting You validate impedance models against EMT simulations and raw field measurement data You design control strategies for voltage and frequency control in hybrid power plants while considering coupling effects You perform tuning processes for PMS control loops in MATLAB/Simulink You contribute to improving impedance measurement methods and modelling workflows YOUR PROFILE You are enrolled in a Master's program in Electrical Engineering, Control Engineering, Power Systems or equivalent You have knowledge of electrical energy systems, ideally with exposure to wind energy You bring experience in MATLAB/Simulink or PSCAD, ideally including power system toolboxes You are interested in stability analysis, system modelling and control design Experience with converter control or wind farm control systems is an advantage You have programming skills in MATLAB; additional languages such as Python or C/C++ are a plus You work in a structured, analytical and self‑organized manner on complex technical topics DEINE BENEFITS Nordex bietet eine Vielzahl an attraktiven Benefits – hier findest du einen Auszug dessen, was Dich bei uns erwartet.
Du entwickelst und konstruierst unsere Produkte und übernimmst dabei sämtliche Schritte im definierten, strukturierten Entwicklungsprozess – von der Idee bis zum serienreifen ProduktDu erstellst und pflegst technische Zeichnungen, 3D-Modelle und Konstruktionsunterlagen und stellst sicher, dass diese den relevanten Normen entsprechenDu wirkst maßgeblich an mechanischen Designs, Prototypen, Funktionsmustern sowie an Validierungs- und Verifizierungsprozessen mitDu führst Konstruktionsänderungen durch, bewertest technische Anforderungen und begleitest Tests, Prüfungen und VerbesserungsmaßnahmenDu erstellst technische Dokumentationen und wirkst an der Umsetzung zulassungsrelevanter Anforderungen (u. a.
YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
What you will do: Lead strategic and operational projects from initial requirements to deployment Serve as a primary point of contact for project-related communication and facilitate meetings, manage expectations, and act as a “translator” between technical and non-technical teams Collaborate with business stakeholders to understand their goals, processes, and challenges Translate these business needs into clear, detailed, and actionable technical requirements and functional specifications Work with the product owner and solution architects to design effective technical solutions Develop and execute test cases to validate that delivered solutions meet the specified requirements Manage project planning, timelines, and provide regular status updates to stakeholders Create and maintain comprehensive documentation, including use cases and process flows to ensure a shared understanding across all teams Who you are: 3+ years of experience as a Business Analyst in a tech environment.
JavaScript Python PostgreSQL Das erwartet dich Konzeption und Entwicklung neuer Funktionalitäten im Frontend und Backend Produktisierung und kontinuierliche Weiterentwicklung des Seller Centers Projektleitung bei Planung, Launch und Post-Launch-Aktivitäten des Seller Centers für SCAYLE-Kunden Ansprechpartner: innerhalb des Seller Center Teams für Kunden, nicht als Account Manager Entwicklung und Priorisierung von Development-Plänen gemeinsam mit multifunktionalen Teams Sammlung von Anforderungen von internen und externen Stakeholdern, insbesondere SCAYLE-Kunden Koordination der Implementierung neuer Funktionalitäten über verschiedene Teams hinweg Roadmap-Planung und -Aufbereitung für unterschiedliche Zielgruppen Das bringst du mit Mindestens 5 Jahre Erfahrung als Product Manager / Product Owner Grundlegende bis gute Kenntnisse in: Systemarchitektur Python, Django HTML, CSS, JavaScript SQL, Postgres REST-APIs UI-Design Generative AI (Gen AI) Expertenkenntnisse in: Entwicklung von MVPs UX-Design Webentwicklung Ausgezeichnete Kommunikationsfähigkeiten Fließende Englischkenntnisse Nice to have Erfahrung im E-Commerce Benefits Hybrid working Täglich frisches Obst Sportkurse Freier Zutritt zur code.talks Exklusive Mitarbeiter Rabatte Kostenlose Getränke Sprachkurse Kostenloser Laracasts Account Company Events Relocation Unterstützung Mobilitätszuschlag State-of-the-art Technologien Zentrale Lage Flexible Arbeitszeiten Betriebliche Altersvorsorge Weiterbildungs- angebote Hunde erlaubt AY Academy Feedbackkultur Firmenfahrrad Was ABOUT YOU/SCAYLE ausmacht?
Who you are Expert PHP (Laravel): Deep track record in designing and building complex e-commerce middleware. Architectural Design: Proven ability to document and implement scalable integration patterns for enterprise systems (ERP, PIM, PSP). AWS & Infrastructure: Expertise in core services (EC2, ECS/EKS, SQS, Kafka) and Infrastructure as Code (Terraform).
Your Profile: Ph.D. or M.Sc. in Mechanical Engineering or equivalent qualifications. Background in mechanical system standardization, modular design, or platform development. 5+ years of experience in similar development or toolkit-related roles. Good understanding of damper systems, machine design, and configuration management.
Your Profile: Ph.D. or M.Sc. in Mechanical Engineering or equivalent qualifications. Background in mechanical system standardization, modular design, or platform development. 5+ years of experience in similar development or toolkit-related roles. Good understanding of damper systems, machine design, and configuration management.
What you will do Own and evolve the Commerce Cloud’s AWS infrastructure through the application of Infrastructure-as-Code (IaC) principles to ensure scalability, high availability, and cost efficiency Design, implement, and optimize CI/CD pipelines and operational workflows utilizing tools such as GitLab CI, AWS CloudFormation, and Terraform.
Concrete Tower's business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. Do you want to take an active role in changing wind energy infrastructure?
Concrete Tower's business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. Do you want to take an active role in changing wind energy infrastructure?
Strong Experience in Monitoring and Observability of the infrastructure (Datadog preferred) and vulnerabilities discovery and tracking with tools such us Falco, Guardduty Strong experience in architectural design for cloud optimized applications Fluent in English both spoken and written Nice to have: AWS or K8s certifications Additional information: **Working model: Due to the upcoming tasks and responsibilities for this position, it is required to work onsite at our headquarters in Hamburg or Berlin on a weekly basis.
Work location: Germany (on-site rotation system) Concrete Tower's business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. As a BoP Civil Site Supervisor (m/f/d) , you will play a key role in supervising civil works and ensuring compliance with safety and quality standards.
Work location: Germany (on-site rotation system) Concrete Tower's business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. As a BoP Civil Site Supervisor (m/f/d), you will play a key role in supervising civil works and ensuring compliance with safety and quality standards.
Exceptional problem-solving and algorithmic thinking skills, coupled with a deep understanding of software design patterns and clean code principles. Expert-level knowledge and practical experience in building modern, scalable web applications using React, TypeScript, and advanced CSS/Styling techniques.
Tech-Stack: Typo3 & Typo3 Extensions, PHP, JavaScript, jQuery, HTML, CSS, Next.js, Python, XML Versionskontrolle mit Git Server- und Hosting-Umgebungen, CDNs Tools: Photoshop, GIMP, diverse Testing- und Debugging-Tools Scrum, Kanban Skills: Abgeschlossenes Studium im Bereich Informatik, Wirtschaftsinformatik, Web-Entwicklung/Software Engineering, Medieninformatik, Digitale Medien oder eine vergleichbare Qualifikation mit mehrjähriger, aktueller Erfahrung in diesem Bereich. Fundierte Erfahrung im Front-End Design und User Experience Design sowie mit modernen Front-End-Technologie und Tools. Sehr gute Englischkenntnisse in Wort und Schrift.
Exceptional problem-solving and algorithmic thinking skills, coupled with a deep understanding of software design patterns and clean code principles. Expert-level knowledge and practical experience in building modern, scalable web applications using React, TypeScript, and advanced CSS/Styling techniques.
Work location: Germany (on-site rotation system) The Concrete Towers business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. As a Quality Technician SITE (m/f/d) , you will play a key role in ensuring quality standards during the construction and installation of concrete towers.
Work location: Germany (on-site rotation system) The Concrete Towers business unit is dedicated to the design, manufacturing, and installation of concrete towers for wind turbines. As a Quality Technician SITE (m/f/d), you will play a key role in ensuring quality standards during the construction and installation of concrete towers.