Dann könnte diese Stelle Ihr nächster Karriereschritt als Senior Systems Engineer (w/m/d) Missile System Design sein! Lesen Sie weiter… Mit Ihrer Erfahrung, Ihrem Know-how und Ihrer Leidenschaft können Sie sich bei den folgenden Themen und Aufgaben bei uns einbringen: Ganzheitliche Analyse und eigenverantwortliche Ableitung von komplexen technischen Anforderungen aus Kunden- und Missionsvorgaben im Bereich der Flugkörperentwicklung Koordination und Steuerung von Arbeitspaketen inkl. eigenverantwortlicher Erstellung und Prüfung von Meilensteinen Steuerung der Auslegung und Definition von Systemarchitekturen und der Erstellung von Spezifikationen Erstellung von Konzepten und Vorauslegungen von Flugkörpern auf System- und Subsystemebene sowie Durchführung des Systembalancing im Rahmen der Erstellung von Konzepten und Vorauslegungen Leitung und Durchführung von Machbarkeitsstudien und Performance-Analysen zur Bewertung und Optimierung von Flugkörperentwürfen sowie Durchführung der Festlegung von Entwurfsprüfungsschritten Unterstützung bei der Modellbildung, Simulation und Validierung von Systemverhalten Erstellung technischer Dokumentationen, Berichte und Präsentationen für interne und externe Stakeholder Enge technische Zusammenarbeit mit internen Fachabteilungen, Industriepartnern, Hochschulen und Instituten mehr weniger WAS SIE DAFÜR MITBRINGEN SOLLTEN Abgeschlossenes Studium der Ingenieurwissenschaften, Luft- und Raumfahrtechnik, Systems Engineering oder abgeschlossene Berufsausbildung mit entsprechender umfangreicher Zusatzqualifikation Mehrjährige Berufserfahrung im Anwendungsgebiet, ggf. abgeschlossene Promotion Fundierte Erfahrung im Bereich Systementwicklung oder Flugkörpersysteme oder Konzeptentwicklung Vorauslegung auf Gesamtsystemebene Umfangreiche Kenntnisse in den Bereichen Systemtechnik, Flugmechanik, Aerodynamik und Simulation Sehr gute Erfahrung mit der Durchführung von Systemstudien unter Verwendung von Matlab, Python, C++ sowie Kenntnisse der modellbasierten Systemmodellierung und des Systems Engineering wünschenswert Kenntnisse im Bereich Flugkörperdesign und Waffensystem wünschenswert Sehr gute Englischkenntnisse in Wort und Schrift Kommunikationsstärke, Zielstrebigkeit und teamorientiertes Arbeiten Selbständige, eigenverantwortliche Arbeitsweise sowie Improvisations- und Organisationsvermögen sowie Fähigkeit zum abstrakten Denken Bereitschaft zu Dienstreisen im In- und Ausland Sie glauben, dass Sie die Anforderungen hinsichtlich der Kenntnisse und Erfahrungen noch nicht vollständig erfüllen?
YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
What makes you stand out You combine strong analytical and conceptual thinking with a keen understanding of customer needs.You are experienced in Java and JavaScript/TypeScript, familiar with common pitfalls, and know how to catch them early through automated testing.You have hands-on experience with acceptance testing tools such as Playwright, Cypress, or Selenium.You bring solid experience in system testing - using Postman for manual API tests and REST Assured with JUnit for automated ones.You have several years of development experience, with a strong focus on automated integration testing and test strategy design (TDD, BDD, risk-based testing).Ideally, you also have experience creating load test scenarios using JMeter and are familiar with cloud platforms such as Microsoft Azure.You enjoy working with containers and messaging systems like Kafka, and you’re eager to design automated test scenarios across a complex, distributed application landscape.You have practical experience in test case management and documentation, using tools such as Zephyr to ensure full test coverage.You have hands-on experience with system monitoring and observability, using tools such as Grafana and Instana to analyze performance metrics and detect issues early.You speak English fluently and have an good command in German in a business context.
ARP4754Preparation of Part 21 compliance documentation (MOC 0-9)Preparation and assessment of safety analysis at system and equipment levelPreparation of specifications and other type design documentsPoint of contact for external supplier in all technical mattersParticipation in EASA panel meetingsSupport of qualification, ground and flight test activitiesPerformance of technical trade studiesDevelopment of technical solutions to in-service problems Your qualifications Master’s Degree or Diplomingenieur in AerospaceMore than 10 years experience in aerospace industryNew product development experience of at least one new part 25 aircraft programme from inception to certificationExpert in landing gear systemsFamiliar with EASA Part 21J und CS/FAR 25Very good English language skillsCapable of structuring and organizing work in efficient and effective mannerStrong team spirit and good communication skillsCreativity and the ability to act independentlyTechnical problem-solving and decision-making abilityWilling to assume responsibility (CVE)Basic German language skills What we offer: Future prospects in an innovative, growing, and agile company An exciting work environment with diverse career opportunities Xtended Engineering GmbH connects qualified engineers with companies from industry and business.
About us Human health matters. SCHOTT Pharma designs science-based solutions to ensure medications are safe and easy to use globally. A team of 4,700 people from over 60 nations contributes to global healthcare.
Ihre Vorteile Das erwartet Sie bei uns: Von Anfang an ein unbefristeter ArbeitsvertragEinstiegsgehalt brutto ab 85.000 € / Jährlich je nach Qualifikation mehr möglich 30 Tage Urlaubsanspruch garantiert100 % Fahrtkostenerstattung (öffentliche Verkehrsmittel oder Pkw)100 % Auszahlung aller Arbeitsstunden (auf Wunsch kein Gleitzeitkonto)Urlaubs- und Weihnachtsgeld (jeweils im Juni und November)Einstieg bei Top-Unternehmen und Marktführern in München Ihre zukünftigen Aufgaben: System-Engineering: Design, Integration & Zertifizierung von Avionik (ATA 34/46) und Kabinen- / Cargo-SystemenStrukturanalyse (Lead): Fachliche Leitung von Stress, Fatigue & Damage Tolerance (Metall/Composite) sowie Erteilen von PrüfsignaturenZertifizierung & Compliance: Festlegen von Means of Compliance (CS-23/25/27/29) und Part-21J-KonformitätIn-Service & Flotte: Technisches Leiten von Upgrades, Instandhalten und Bewerten von Fertigungsabweichungen (Concessions)Digitalisierung: Automatisieren von Analyseprozessen und FEM-Methoden mittels Programmcode Dieses Profil bringen Sie mit: Expertise: Tiefgreifendes Wissen in Spannungs-, Ermüdungs- und Schadenstoleranzanalysen (F&DT)Hintergrund: Abgeschlossenes Ingenieurstudium: Master / Dr. in der Luft- und Raumfahrttechnik oder MaschinenbauErfahrung: 10+ Jahre in der Strukturanalyse über den gesamten Flugzeug-Lebenszyklus (Metalle & Verbundwerkstoffe)Zertifizierung: Fundierte Kenntnisse der CS-25 Anforderungen sowie gängiger Methoden und ToolsLeadership: Erfahrung in der fachlichen Leitung komplexer Arbeitspakete und in der Personalentwicklung / Schulung Kontakt: Übergeben auch Sie Ihre Jobsuche an die professionellen PASIT-Berater, denn wir finden für Sie den exakt passenden Job.
You will develop new tools and procedures for further customization and automatization of existing products and processes and improve system availability with proactive work to avoid outages and performance issues with particular focus on maintenance services for all infrastructure used by the Operations Centre. WHAT YOU WILL DO Provide low-level design for platforms supported within area of responsibility in IT Services Develop, test, implement and maintain/drives standards for platform build and management, in cooperation with other Infrastructure and Operations teams, peers from other IT Services locations and related global structures Define and maintain operation procedures for the platform, contribute to capacity planning and HW setup standards Provide 3rd level support for the infrastructure mentioned above, work on problem resolution and implement selected changes (including patching, upgrades, etc.) in cooperation with production operations and other departments and vendors Actively cooperate and contribute on other product/platform related tasks WHAT YOU SHOULD HAVE: Deep knowledge of RHEL operating system (senior administration level).
Job description / Your role: Take full ownership for the mechanical and thermal design of LEOspace products Supervise and coordinate all related engineering activities, including mechanical design, structural analysis, thermal design, and thermal analysis Lead and support the mechanical and thermal testing and qualification of space hardware Prepare comprehensive technical documentation, including design descriptions, development schedules, and test definitions Conduct preliminary assessments of mechanical and thermal robustness within an agile development framework Support system-level testing and qualification processes Contribute to our Simultaneous Engineering approach by collaborating with industrial process engineering teams to scale the production of mechanical and thermal systems Qualification Checklist: University degree (or equivalent) in engineering, aerospace, or a related technical field Experience in the space industry, with a focus on mechanical and thermal system design Demonstrated expertise in mechanical and/or thermal analysis, with knowledge of industry best practices Familiarity with material and process selection for space applications Strong teamwork and collaboration skills Fluency in English (written and spoken) Bonus Qualifications: Strong conceptual thinking and problem-solving skills Practical experience with numerical engineering tools for mechanical and thermal analysis in space systems Initial experience in leadership or project coordination roles Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if required Ihr Ansprechpartner Dr.
Register now and look forward to many interesting and suitable positions and projects. DFM, cost conscious design Structural analysis Supplier management Corrosion protection for electrical components Bring design from concept to production ready – including drawings and tolerance stack ups for system assemblies (full product lifecycle) Strong background in designing structural housings for electrical equipment ( both metal and plastics) OnShape, Solidworks or Catia Experience – (OnShapeused) Automotive qualification experience / Consumer electronics qualification experience Project with the possibility of an exctinction Ihr Kontakt Referenznummer 864293/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
Register now and look forward to many interesting and suitable positions and projects. DFM, cost conscious design Structural analysis Supplier management Corrosion protection for electrical components Bring design from concept to production ready – including drawings and tolerance stack ups for system assemblies (full product lifecycle) Strong background in designing structural housings for electrical equipment ( both metal and plastics) OnShape, Solidworks or Catia Experience – (OnShapeused)Automotive qualification experience / Consumer electronics qualification experience Project with the possibility of an exctinction Ihr Kontakt Referenznummer 864293/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
As part of our team, you will take on the following responsibilities: You are responsible for the implementation, administration, monitoring, and maintenance of IT systems and services in a Windows Server environment, in compliance with defined security policies.You analyze and resolve incidents in 2nd- and 3rd-level support within the Windows Server infrastructure.You implement hardening measures to reliably meet regulatory, compliance, and security requirements.In addition, you ensure the continuous development of the systems, with a focus on security, efficiency, and stability, and guarantee stable operations as well as correct and efficient licensing within lifecycle management.You manage and monitor external service providers and ensure a high level of service quality.You conduct market analyses for the selection and evaluation of hardware and software products.You design and implement concepts for server and application operations in compliance with defined security policies.You plan, coordinate, and support IT projects and business sub-projects from realization through testing to rollout.You advise business departments on projects, changes, and adjustments to IT services, systems, and applications.You analyze and evaluate functional, technical, and business requirements and ensure their secure integration.You identify potential for process optimization, automation, and interface improvements and implement them sustainably.
Even if you don’t tick all the boxes below, we’d love to hear from you! YOUR WORK: Node.js development • Design and develop scalable enterprise-grade Node.js solutions for Artificial Intelligence • Be a Node.js senior developer, advising to more junior team members across the globe • Implement best practices on scaling, monitoring, testing and enterprise Node.js deployments • Analyze end-to-end performance of Node.js microservices to achieve the best latency • Continuously improve CD/CI automated pipeline • Consult proposed designs with Product Owner and prioritize development effort with him/her • Work with an enthusiastic team in an Agile environment (SCRUM) • Collaborate with DHL‘s global teams on continuous improvement of Node.js applications KEY REQUIREMENTS: • 3+ years of experience with Node.js design and development • In-depth experience with Javascript ES6 and ES7 implementations • Practical knowledge of microservice architecture and containerization tech (e.g.
In this position you will work with applications engineers, product engineers and account managers to design and offer Leybold service and solutions that helps clients supercharge their process efficiencies. This position acts as the service sales liaison between the Leybold factory and the client with the intent to teach companies how to maximize the life cycle of their equipment through means of the VTS Service Ladder.
Erfahrung in der Entwicklung oder Integration von Softwaresystemen, idealerweise im B2B- oder SaaS-Umfeld. Vertrautheit mit API-Design, REST, JSON, XML und modernen Integrationskonzepten. Gute Kenntnisse in Java oder einer ähnlichen Sprache. Verständnis für Geschäftsprozesse, Datenflüsse und ein Auge für sauberen Code.
o Experience with Beckhoff PLC systems (preferred). o Knowledgeable about quality standards for electrical designs and diagrams. o Knowledgeable about safety standards for electrical designs and diagrams. o Demonstrates ownership and accountability.
Das erwartet Dich Analysieren und Bewerten sicherheitsrelevanter, elektrische/elektronischer Systemkomponenten und Bauteile im Rahmen von Systembetrachtungen gemäß der ISO 26262Erarbeiten von Machbarkeitsnachweisen für die Sicherheits- und Komponentenkonzepte im Hinblick auf Eignung, Risiken und KostenAbstimmung und Kommunikation der Analyse-/Bewertungsergebnisse mit den entwickelnden Bereichen sowie den SystemarchitektenWeiterentwicklung der Vorgehensweise in der Analyse funktions- und sicherheitsrelevanter AnforderungenGestalten von Dokumentenvorlagen zur Beschreibung der Analysen und Ergebnisse Das bringst Du mit Abgeschlossenes Studium der Elektrotechnik, Fahrzeugtechnik, Informationstechnik oder einer vergleichbaren Fachrichtung Erste Erfahrungen im Bereich der funktionalen Sicherheit gemäß ISO 26262Kenntnisse im Anforderungsmanagement und in der Dokumentation(Erste) Berufserfahrung im Bereich Embedded System Design, Hardware- oder Softwaredesign in der AutomobilindustrieGute Kommunikations- und ModerationsfähigkeitenSichere Deutsch- und Englischkenntnisse Was wir bieten Attraktive Vergütung: Überdurchschnittliches Gehalt mit individuellen Zuschüssen und ausgezeichneter Entwicklung nach Tarifvertrag High-End Kunden: Zusammenarbeit mit den angesagtesten Unternehmen der AutomobilbranchePROGNUM-Guide - Das Besondere: Bei PROGNUM lassen wir Sie nicht allein!
Training of in-house departments, such as sales, bid management, project execution Translation of functionalities required to Epics/Feature descriptions & high-level acceptance criteria What you bring: Successfully completed university degree in Electrical Engineering, Automation, or a related technical field Proven experience (at least 5 years) as a Solution Architect, System Architect, Lead Engineer, or Project Manager in the SCADA/Control Systems domain for energy or industrial applications Strong knowledge of SCADA system architecture and design, including redundancy concepts, high availability, and scalability Strong knowledge of electrical engineering principles, standards, and codes Deep understanding of communication protocols such as IEC 60870‑5‑101/104, IEC 61850, OPC UA, DNP3, Modbus; experience with ICCP/TASE.2 is a plus Hands-on experience with leading SCADA platforms (e.g., T3000, Siemens Spectrum Power, WinCC OA, COPA-DATA zenon, VIVAVIS HIGH-LEIT…) Solid understanding of networking and IT security principles Experience in project execution, including preparation of technical specifications Knowledge of data modeling and HMI/alarm management Market and technology awareness of SCADA solutions and integration into OT/IT environments Language: English: Excellent communication and interpersonal skills, with the ability to engage customers at eye level Strong analytical and problem-solving skills, combined with a collaborative and structured approach Excellent communication and interpersonal skills, with the ability to engage customers at eye level Strong analytical and problem-solving skills, combined with a collaborative and structured approach Language skills: English (fluent); German is desirable How to apply: If you world like to apply directly, please feel free to send us your CV by email or submit your details via the online application provided.
Konzeption, Machbarkeitsanalysen und Evaluation Ihr Profil: Mindestens 3 Jahre Berufserfahrung als ML-Engineer, idealerweise im Versicherungs- oder Sozialversicherungsumfeld Sehr gute Python-Programmierkenntnisse mit mehreren Jahren produktiver Anwendung Erfahrung im Betrieb containerisierter Anwendungen in Produktionsumgebungen (Kubernetes & Docker) Fundierte Kenntnisse in Software-Design & Architektur: API-Design, Service-Schnittstellen, technische Dokumentation Praxis im Testen und Betreiben produktiver KI-Systeme: Unit- & Integrationstests Daten- und Trainingspipelines Training & Deployment Monitoring & Alerting in mindestens einem produktiven System Rahmenparameter: Einsatzort: Remote (80%) & Hannover/München (20%) Laufzeit: 01.04.2026 - 31.12.2026 Auslastung: Vollzeit Ihr GECO-Ansprechpartner freut sich auf Ihre Kontaktaufnahme und über die Zusendung Ihrer aussagekräftigen Projekthistorie sowie Ihrer Honorarvorstellung.
Your Tasks Focus of this position is the development of modifications and the MRO support of the Do328 in-service aircraft (legacy). This includes the design and installation of electrical and mechanical systems.Perform and validate physical design and installation of systems into airframe with CAD and according DMU processes and fulfilling given installation requirements.
Stellenbeschreibung Join us on our journey to success We are currently recruiting in Munich, Stuttgart, Nuremberg, and Augsburg. This appeals to you: Design, develop, and implement embedded software solutions for various microcontrollers and processorsCollaborate with hardware engineers to define software architecture for embedded systems, considering hardware constraintsWrite efficient, reliable code in C, C++, or assembly language for embedded systemsDevelop software for RTOS (Real-Time Operating System) to ensure timely and predictable task executionCreate and optimize drivers for peripherals and interfaces like sensors, actuators, and communication modulesIdentify and resolve issues through debugging and testing to ensure system stability and performanceWork with cross-functional teams, including hardware engineers and quality assurance, to deliver integrated solutionsImplement security measures to protect embedded systems from vulnerabilities and cyber threatsOptimize code and algorithms for resource-constrained environments, considering factors like power consumption and memory usage This is you: Bachelor’s or higher degree in Computer Science, Electrical Engineering, or a related fieldProficiency in programming languages such as C and C++Experience in embedded systems development with knowledge of microcontroller/microprocessor architecturesFamiliarity with real-time operating systems (RTOS) and embedded development toolsKnowledge of communication protocols (e.g., SPI, I2C, UART) and networking protocols is a plusUnderstanding of hardware design principles is advantageousStrong problem-solving skills and attention to detailExcellent communication skills for effective collaboration and documentationIndustry-specific certifications or relevant experience may be preferredGood German and Englisch language skills What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesCompetitive, industry-standard / above-industry-standard salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for significant occasions when employed at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH connects skilled engineers with companies in the industrial and commercial sectors.
Lesen Sie weiter… Mit Ihrer Erfahrung, Ihrem Know-how und Ihrer Leidenschaft können Sie sich bei den folgenden Themen und Aufgaben bei uns einbringen: Analyse von Systemanforderungen zur Ableitung von Anforderungen an komplexe Telemetriesysteme (Video- und Datenübertragung) sowie Flugabbruchsysteme bei Flugkörper-Schussversuchen Entwicklung von Lösungen für neue Telemetrie- und Flugabbruchsysteme in enger Zusammenarbeit mit den Produktsicherheitsverantwortlichen Durchführung von Obsoleszenzanalysen an vorhandenen Baugruppen sowie Design-Anpassungen an neue Anforderungen Komponenten-Bestellwesen für den erneuten Aufbau vorhandener Lösungen für Telemetrie und Flugabbruch, insbesondere auch kritischer Langläuferteile Erstellung von Marktübersichten über kaufbare Telemetrie- und Flugabbruchsysteme sowie zu Vorlagen für Make or Buy Entscheidungen Technisches Management von Unterauftragnehmern in enger Zusammenarbeit mit der Einkaufsabteilung Mitarbeit beim Aufbau von Mess-, Test- und Nachweisumgebungen für Telemetrie-/Flugabbruchsysteme sowie Durchführung von Tests Integration der Baugruppen und Unterstützung bei der Integration in das übergeordnete System sowie Durchführung von formalen Abnahmen mehr weniger WAS SIE DAFÜR MITBRINGEN SOLLTEN Abgeschlossenes Studium im Bereich Nachrichtentechnik oder Elektrotechnik oder vergleichbarer Studiengang oder abgeschlossene Berufsausbildung mit entsprechender Zusatzqualifikation Mehrjährige Berufserfahrung im Umgang mit drahtlosen Übertragungssystemen Fundierte Kenntnisse und Erfahrungen im Umgang mit Hochfrequenz- und Elektronikbaugruppen Umfangreiche Kenntnisse in der Bearbeitung sicherheitskritischer Themen Sehr gute Englischkenntnisse in Wort und Schrift Hohe Team- und Kommunikationsfähigkeit sowie Verantwortungsbewusstsein und Selbständigkeit Ausgeprägte technische, analytische und konzeptionelle Fähigkeiten Bereitschaft zu Dienstreisen im In- und Ausland Sie glauben, dass Sie die Anforderungen hinsichtlich der Kenntnisse und Erfahrungen noch nicht vollständig erfüllen?
Lesen Sie weiter… Mit Ihrer Erfahrung, Ihrem Know-how und Ihrer Leidenschaft können Sie sich bei den folgenden Themen und Aufgaben bei uns einbringen: Entwicklung von komplexer Embedded Software in C/C++ und Rust für Lenkflugkörpersysteme Erstellung von technischen Konzepten, Architekturen und Performanceanalysen Entwicklung von Embedded Software für sicherheitskritische Anwendungen Erstellung von Software Anforderungen, Design, Implementierung, Test und Integration Erwirkung von Software Freigaben sowie technische Unterstützung von Flugfreigaben und Kampagnen Enge Zusammenarbeit und Abstimmung mit den Projektpartnern Präsentation der Arbeitsergebnisse bei internen und externen Stellen mehr weniger WAS SIE DAFÜR MITBRINGEN SOLLTEN Erfolgreich abgeschlossenes technisches Studium im Bereich Informatik, Informationstechnik, Elektrotechnik oder vergleichbare Qualifikation Mehrjährige Berufserfahrung im Bereich Embedded Software Vergleichbare Abschlüsse und Qualifikationen werden gleichermaßen berücksichtigt Fundierte Kenntnisse in der hardwarenahen Echtzeitprogrammierung in C/C++ und Rust Sehr gute Kenntnisse im Bereich Echtzeit-Betriebssysteme und Embedded Linux Erfahrung im Einsatz moderner Entwicklungsmethoden und -umgebungen Fähigkeiten in der Analyse von Problemen und der Erarbeitung von Lösungen unter Berücksichtigung von System-, Software- und Hardware-Aspekten Sehr gute Englischkenntnisse in Wort und Schrift Ausgeprägtes Verantwortungsbewusstsein sowie gewandtes, sicheres Auftreten und Kommunikationsstärke Analytische und konzeptionelle Fähigkeiten sowie zielorientierte Arbeitsweise Bereitschaft zu Dienstreisen im In- und Ausland Sie glauben, dass Sie die Anforderungen hinsichtlich der Kenntnisse und Erfahrungen noch nicht vollständig erfüllen?
Dann könnte diese Stelle Ihr nächster Karriereschritt als Senior Systems Engineer (w/m/d) Missile Aerodynamics Design sein! Lesen Sie weiter… Mit Ihrer Erfahrung, Ihrem Know-how und Ihrer Leidenschaft können Sie sich bei den folgenden Themen und Aufgaben bei uns einbringen: Ganzheitliche Analyse, Bewertung und Optimierung des Flugkörperentwurfs hinsichtlich geforderter Leistungsparameter, insbesondere in Bezug auf die aerodynamische Auslegung Herleitung und Prüfung von technischen komplexen Anforderungen auf System- und Subsystemebene Interne Abstimmung zu Flugkörperarchitektur, technischen Lösungen sowie Optimierungs- und Leistungsbilanzierungsmaßnahmen Enge technische Zusammenarbeit mit internen Fachabteilungen und Abstimmung mit Industriepartnern, Hochschulen und Instituten Mitwirkung bei der Festlegung von Entwurfsprüfungsschritten und Nachweisszenarien inkl.
Stellenbeschreibung We are looking for the München location. Your Tasks Design and develop/modify the electrical power generation and distribution system and equipmentRequirements management in accordance with ED-79/ARP4754APrepare Part 21 compliance documentation (MoC 0-9)Prepare and assess safety analyses at system and equipment levelPrepare specifications and other type design documentsBe the point of contact for external suppliers in technical mattersParticipate in EASA panel meetingsSupport qualification, ground and flight test activitiesPerform technical trade studiesDevelop technical solutions to in-service problems Your Qualifications Master’s Degree or Diplomingenieur in Aerospace More than 5 years of experience in aerospace industry Experience of at least one new aircraft development pro-gram Experience in Electrical Load Analysis and ELA-Tools Familiar with EASA Part 21J and CS-25/FAR 25 and opera-tionals requirementsVery good English language skills and good German language skillsExcellent team spirit, communication and interpersonal skillsWill to to assume responsibilityCapable of structuring and organizing work in efficient and effective mannerStrong analytical skills, hands-on mentalityCreativity and the ability to act independentlyTechnical problem-solving and decision-making ability What we offer: Collaboration in a fast-growing, international aerospace company Flexible working hours and flextime options Xtended Engineering GmbH connects qualified engineers with companies from industry and business.
Responsibilities: Quality inspection of Single Parts, Assemblies, Installations in accordance with Jobcards, Drawings and all necessary manufacturing Regulations and Specifications during aircraft assemblyMonitoring and control of the ongoing assembly processCreating of Quality Notifications in SAPContinuous Improvement of production processes and collaboration with Production and Design Organisation Requirements: At least 3 years of experience in aeronautical industry and aircraft manufacturing in the role of quality inspectionExperienced in SAP ERP System and / or Siemens Teamcenter PLM SoftwareVery good German and English language skillsStructured, independent and solution oriented way of workingInternational mind-set What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
About us Human health matters. SCHOTT Pharma designs science-based solutions to ensure medications are safe and easy to use globally. A team of 4,700 people from over 60 nations contributes to global healthcare.
Specific Responsibilities:Development and implementation of power and control electronic boards for complex medical laser devices.Creation of electrical circuit and wiring diagrams for complex medical laser devices.Development and implementation of electrical as well as laser power safety concepts to assure product functional safety.Implementation and execution of concepts for product cost reduction.Collection and determination of technical requirements and specifications.Create component and system specifications and other quality related documents such as risk analysis, DFMEA, test and verification reports, etc. in compliance with international requirements (CE, FDA, MHLW).Perform verification tests to verify electrical as well as laser components and product requirements.Maintain products and laser systems to ensure stable and reliable operations as part of the product lifecycle management process.Support of troubleshooting electrical- and laser-related issues.Performing of engineering tasks during setup and start-up of prototypes.Coordinate and work with third-party suppliers and contractors.Monitoring of technological trends in laser, photonics and electronics, including reviews of competitors' technology.Adherence to National and international standards and regulationsRequirements stated in system specifications.Project goals and costs.Process definitions in the product design and related processes. Ihr Profil Masters’s degree in science and engineering with experience in R&DSpecialization in laser physics and electronic engineering or biomedical engineering with focus on optronicsMinimum 6 years of experience in development of laser and electrical devices; preferably medical laser devicesAdvanced knowledge of electronics (power-, digital-, analog- and microprocessor technology).Advanced knowledge of optical laser systems (Solid-State-, Semiconductor-, and fiber lasers)Experienced in design implementation and characterization of high-performance laser systemsExperienced in design and development of power and digital electronic boards.Knowledge in EMI/EMC design rules and electrical safety as well as laser safetyExperienced in creation of electrical circuit diagrams.Programming skills in Python, C/C++, and LabVIEWExperienced in creating technical reference documentation.Knowledge in requirements and systems engineering.Experienced in performing Design Transfer to production Creativity and Analytical Skills.Assertiveness.Demonstrated ability to work and contribute in a team environment.Motivated and creative, ability to “think outside the box”Be able to function independently of direct supervisionStandards knowledge: ISO 13485, FDA 21 CFR 820.30, IEC 14971, IEC 62366, IEC 60601-1, IEC 60601-1-2 and collateral standardsMs Office; Outlook, Word, Excel, PowerPointKnowledge in ERP system; Preferably Infor SyteLineKnowledge in Altium, Eagle, OrCAD PSpice, Multiphysics simulation, MATLABKnowledge in requirement management tool such as DOORS, Polarion or CodeBeamerKnowledge in building PCB prototypes and system cabling Warum wir?
Troubleshooting, Störungsbeseitigung und Identity Management (manuelle und automatisierte Updates) Analyse und Behebung von Systemfehlern im Betrieb (L1 & L2 Support) sowie Monitoring der IT-Infrastruktur Design und Konzeption von IT-Systemen und betriebsrelevanten Tools inkl. Planung, Umsetzung und Validierung Installation, Konfiguration und selbstständige Inbetriebnahme von Infrastruktursystemen inkl.
Register now and look forward to many interesting and suitable positions and projects. Design and implementation of BCU-based control systems for high-voltage direct current (HVDC) transmission systemsDevelopment and integration of control functions in DIGSI and verification of these functions in hardware-in-the-loop (HiL) test environmentsCreation of design specifications, technical documentation, and effort estimatesClarification of technical requirements within the project team as well as with customers and suppliersConducting training sessions and knowledge sharing with colleagues and customersRemote support during commissioning and servicing of HVDC systemsDesign and Implementation of BCU-based Steering System for Hochspanungs-Gleichstrom-Übertragungssysteme (HVDC) University degree in electrical engineering with a focus on power engineering and relevant, in-depth experience in applicationSound knowledge of the parameterization of Bay Control Units (BCUs), preferably SIPROTEC 5 devices with DIGSI and CFC (Continuous Flow Chart)Experience in implementing the IEC 61850 standard for substation control and data exchange with higher-level automation and SCADA systemsDeep understanding of high-voltage technology, protection and control schemes, and automated control sequencesGood knowledge of the secondary interfaces of high-voltage components such as switchgear, transformers, and current and voltage transformers (CTs and VTs)Native-level English skills; fluent German is an advantage You benefit from exclusive access to interesting companies and exciting projects in collaboration with Hays as a solid and stable partnerCompensation in accordance with the industry's collective agreement (IGZ-DGB)Annual vacation entitlement of 30 daysWorking time account with the option to pay overtime or take time off in lieuProfessional and trusting collaboration Ihr Kontakt Ansprechpartner Marco Strötker Referenznummer 859208/1 Kontakt aufnehmen E-Mail: marco.stroetker@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Ihre Aufgaben: Aufsetzung, Wartung und kontinuierliche Optimierung der Toollandschaft für die Softwareentwicklung Ausbau und Verbesserung von CI/CD-Pipelines sowie der zugrunde liegenden Entwicklungsinfrastruktur Konzeption und Umsetzung von Software-Designs und Architekturelementen zur Reduzierung von Komplexität Unterstützung der Entwicklungsteams bei der Nutzung und Weiterentwicklung der CI/CD-Toolchain Sicherstellung der Einhaltung von Zeit-, Qualitäts- und Kostenvorgaben bei der Aufgabenbearbeitung Enge Abstimmung im Entwicklungsteam zu Aufgaben, Herausforderungen und Workpackages Ihr Profil: Abgeschlossenes Hochschulstudium der Informatik oder eine vergleichbare Qualifikation Erste einschlägige Berufserfahrung im IT- oder Softwareumfeld Kenntnisse in der Systemadministration oder im Betrieb von Entwicklungsinfrastrukturen Erfahrung in der Arbeit mit agilen Methoden im Softwareentwicklungsumfeld Teamfähigkeit sowie eine strukturierte und eigenverantwortliche Arbeitsweise Kommunikationsstärke im Austausch mit Entwicklungsteams und Schnittstellen Was wir Ihnen bieten: Einen festen Arbeitsvertrag nach DGB/GVP – Tarifvertrag Eine übertarifliche Vergütung zzgl.
Du legst großen Wert auf hohe Qualität – dazu gehören ein tiefes Verständnis von Softwarearchitekturen, eine Affinität für konzeptionelle Klarheit sowie der Einsatz von Design Patterns und Code Reviews. Du hast den Ehrgeiz, dich kontinuierlich weiterzuentwickeln – sei es durch interne Tech Talks, teamübergreifende Gemeinschaften, Konferenzen oder Forschung.
Du konzipierst, implementierst und betreibst robuste Integrationen zwischen SaaS- und On-Prem-Systemen und designst dafür passende APIs (REST/ggf. GraphQL), Webhooks und Event-Flows.Du entwickelst, versionierst und betreibst n8n-Workflows, inklusive der Erstellung von Custom Code (TypeScript/Python) und baust wiederverwendbare Connectoren und Module auf.Du erstellst komplexe Daten-Mappings sowie Transformationslogiken und stellst dabei Datenqualität, Idempotenz und eine hohe Fehlerrobustheit der Prozesse sicher.Du richtest Monitoring, Logging und Alerting für alle Integrationen ein, pflegst diese kontinuierlich und führst bei Störungen systematische Root-Cause-Analysen durch.Du etablierst stabile Betriebs- und Störungsprozesse (z.B.
LCD, OLED, TFT, Touch, Schnittstellen wie LVDS, MIPI, HDMI) Erfahrung mit Entwicklungstools für das PCB-Design und Programmierung in C von Vorteil aber nicht Voraussetzung Persönliche Fähigkeiten Strukturierte, lösungsorientierte Arbeitsweise und hohe Teamfähigkeit Sehr gute Kommunikationsfähigkeiten in Deutsch und Englisch Reisebereitschaft im Rahmen von Kundenprojekten (optional) Wir bieten Ihnen: Sicheren und verantwortungsvollen Arbeitsplatz in einem modernen, familiengeführten Unternehmen Spannende Projekte mit innovativen Display-Technologien Ein internationales und technikbegeistertes Team Flache Hierarchien und kurze Entscheidungswege Flexible Arbeitszeiten und ggf.
As an Injection Moulding Engineer, you'll bring your expertise to strengthen our project teams and play an active role in design for manufacturing of our plastic components. Key responsibilities Your main responsibilities will include: Acting as an individual contributor in projects related to injection moulding design, leading the implementation and documentation of new processes from 3D model to final component.
Electronic Navigational Charts, Vektordaten, Luftbilder, CAD-Daten) und Verarbeitung durch die Anwendung von z. B. ENC-Designer, Autodesk 3dsMax teilweise nach Vorgaben Durchführung des technischen Anforderungsmanagements von Kunden, sowie internen und externen Stakeholdern für digitalen Content Unterstützung bei der Erarbeitung von umfangreichen Lösungskonzepten unter Berücksichtigung der technischen Rahmenbedingungen des jeweiligen Zielsystems Unterstützung des Gruppenleiters bei der Angebotsbearbeitung durch Benennung und Abschätzung Arbeitspaketen und ggf.
Deine Aufgaben Du entwickelst und betreibst eine globale Cloud-Plattform auf Basis gängiger IaaS-Produkte unter Berücksichtigung nationaler Anforderungen.Du schließt Lücken in der Cloud-Native-Landschaft und sorgst für ein nahtloses Zusammenspiel interner und externer Services.Du berätst Entwicklungsteams zu Design, Continuous Delivery, Monitoring, Skalierung und Anbindung an Cloud- und Plattformdienste.Du arbeitest eng mit Auftraggebern und externen Partnern zusammen, um grundlegende Plattformanforderungen zu realisieren.Du gestaltest die Weiterentwicklung der Plattform aktiv und vorausschauend mit.
Ihre Vorteile Das erwartet Sie bei uns: Von Anfang an ein unbefristeter ArbeitsvertragEinstiegsgehalt brutto ab 78.000 € / Jährlich je nach Qualifikation mehr möglich 30 Tage Urlaubsanspruch garantiert100 % Fahrtkostenerstattung (öffentliche Verkehrsmittel oder Pkw)100 % Auszahlung aller Arbeitsstunden (auf Wunsch kein Gleitzeitkonto)Urlaubs- und Weihnachtsgeld (jeweils im Juni und November)Einstieg bei Top-Unternehmen und Marktführern in München Ihre zukünftigen Aufgaben: Entwickeln realistischer Simulationssysteme zur präzisen Abbildung komplexer Flug- und Engineering-ProzesseKontinuierliches Integrieren von Engineering- und Flugtestdaten zur Sicherstellung aktueller und valider SystemmodelleKoordinieren und Steuern von Simulator-Aktivitäten in enger Abstimmung mit den FachabteilungenFachliches Beraten der Design-Organisation als kompetenter interner Dienstleister und Ansprechpartner Dieses Profil bringen Sie mit: Studium: Bachelorabschluss in der Informatik oder eine vergleichbare Ausbildung / Qualifikation (m/w/d)Mindestens fünf Jahre Berufserfahrung mit einer SimulationssoftwareFundiertes Wissen in der Luft- und Raumfahrt wünschenswert IT-Skills: Sicher in Parallelprogrammierung (MPI, OpenMP, CUDA, OpenCL) sowie Version Control und DebuggingZwingend erforderlich: Verhandlungssichere Englischkenntnisse in Wort und Schrift Kontakt: Übergeben auch Sie Ihre Jobsuche an die professionellen PASIT-Berater, denn wir finden für Sie den exakt passenden Job.
Electrical Engineer (m/w/d) Ihre Aufgaben Analyse von Produkt- und/oder Komponentenanforderungen als Basis für fundierte technische Konzepte(Weiter-) Entwicklung und/ oder Auswahl elektronischer Komponenten unter Berücksichtigung funktionaler, wirtschaftlicher und terminlicher Aspekte Durchführung von Designanalysen von Produkt- und/oder Komponenten zur Sicherstellung der technischen Machbarkeit und QualitätKoordination der Entwicklung einzelner Komponenten als Bestandteil von MarinesystemenVerantwortung für die Integration der entwickelten Komponenten in bestehende oder neue SystemarchitekturenEigenständige Dokumentation und Analyse der Arbeitsergebnisse im Rahmen unserer Entwicklungsprozesse, sowie Berichterstattung gegenüber der AblauforganisationErstellung von moderaten Hardwarespezifikationen und Fertigungsunterlagen für eine reibungslose Übergabe an Produktion und Qualitätssicherung Ihr Profil Abgeschlossenes Fachhochschul-Studium der Elektrotechnik, Informationstechnik oder Mechatronik mit erster Berufserfahrung oder alternativ eine abgeschlossene elektrotechnische Berufsausbildung mit anschließender Weiterbildung zum Techniker:in und mehrjähriger Berufserfahrung.Kenntnisse von Methoden zur Analyse und zum Design von verteilten Systemen.Erfahrung mit Versionskontrollsystemen wie Git, SAP und Tools für die Zusammenarbeit (z.B. Jira, Confluence).Sehr gute kommunikative Fähigkeiten, eine selbstständige Arbeitsweise und Durchsetzungsvermögen in heterogenen Gruppen.Sehr gute Deutsch- und gute Englischkenntnisse in Wort und Schrift.
DevOps Engineer (m/w/d) Ihre Aufgaben Aufsetzung, Wartung und Optimierung aller für die Softwareentwicklung benötigten ToolsReduzierung der Komplexität durch weitere Dekompositionen, Erstellung von Umsetzungskonzepten und Software-Designs sowie Verbindung von Einzelartefakten der Softwareentwicklungs-Infrastruktur für das jeweilige Architekturelement beim Ausbau und der Wartung der InfrastrukturAusbau und Optimierung von CI/CD-PipelinesUnterstützung von Entwicklungsteams bei der Nutzung der CI/CD ToolchainBewertung der eigenen Aufgaben hinsichtlich Einhaltung der Vorgaben in Zeit, Qualität und KostenAbstimmung im Entwicklungsteam über die eigenen Aufgaben, Problemstellungen und Hindernisse bei der AufgabenbearbeitungUnterstützung im Team bei der Planung und Umsetzung des Workpackages Ihr Profil Fachhochschulstudium der Informatik oder vergleichbare QualifikationErste BerufserfahrungErfahrung im Bereich Informatik oder SystemadministrationTeamfähigkeitAgile Arbeitsweisen im Software-Entwicklungsumfeld Berufliche Karrieren verlaufen nicht immer perfekt oder geradlinig.
Zudem übernehmen Sie Teile der Designlenkung und koordinieren die Schnittstellenarbeit mit Design Engineering, Quality DD, Risikomanagement und Usability Engineering Sie verfügen über eine abgeschlossene akademische Ausbildung im Engineer Bereich und haben Berufserfahrung in der Pharmaindustrie Sie sind vertraut mit den Anforderungen des Design Control Prozesses für Kombinationsprodukte und bewegen sich sicher in einem regulierten Umfeld.
Betrieb und kontinuierliche Weiterentwicklung der IT- Infrastruktur (Sicherstellung eines stabilen und leistungsfähigen Betriebs von Rechenzentrums-, Server- und Netzwerkinfrastrukturen sowie Umsetzung technischer Verbesserungen) Design, Aufbau und Pflege automatisierter Bereitstellungs-, Konfigurations- und Deploymentprozesse (z. B. mit phyton, Ansible, Kubernetes, GitOps-Ansätze) Aufbau effizienter Build-, Test- und Release-Pipelines und Etablierung eines modernen, professionellen Betriebsmodells Einsatz und Administration von Lösungen führender Hersteller wie Cisco, VMware, Nutanix, Microsoft, Fortinet, etc.
Review civil-related contract elements and prepare quotations for civil design and works. Act as the expert interface between Hitachi, clients, and contractors. Manage external civil design partners and handle internal design tasks.
Probieren Sie es aus und erfahren Sie, was der Markt Ihnen zu bieten hat – völlig kostenfrei, diskret und unverbindlich! Wir freuen uns auf Sie. Planung, Design und Dokumentation von Netzwerken sowie Überwachung und Analyse des Netzwerkverkehrs Troubleshooting: Analyse und Behebung von Störungen sowie Optimierung von Routern, Switches und WLAN (CISCO & HP) Betreuung von VPN-Verbindungen, Firewall-Umgebungen und zentralen Netzwerkdiensten wie DHCP und DNS Mitarbeit in IT-Projekten sowie Unterstützung in Systemadministration und IT-Support Abgeschlossenes IT-Studium oder vergleichbare technische Ausbildung sowie fundierte Erfahrung mit WAN-/LAN-Infrastrukturen und deren Komponenten Umfangreiche Kenntnisse in der Administration und Konfiguration von Routern und Switches sowie grundlegende Erfahrung im Umgang mit Firewalls Ausgeprägte Kommunikations- und Teamfähigkeit in Kombination mit einem hohen Qualitätsbewusstsein Zielorientierte, strukturierte Arbeitsweise mit hohem Verantwortungsbewusstsein Arbeiten in einem modernen Familienunternehmen, das Innovation fördert und Veränderungen aktiv vorantreibt Ein wertschätzendes Arbeitsumfeld mit offener Unternehmenspolitik und transparenten Entscheidungswegen Teil einer starken Markenwelt werden und die Möglichkeit erhalten, eigene Ideen und Impulse einzubringen Ein Unternehmen, das Vielfalt, Offenheit und gegenseitigen Respekt lebt und gezielt fördert Gehaltsinformationen Je nach Erfahrungsgrad wird diese Stelle mit einem Jahresgehalt von bis zu 60.000 vergütet.
Manage and refine business and technical requirements in collaboration with stakeholders Coordinate data integration activities with various source systems Design and model data structures within a Data Warehouse environment, with a strong focus on Data Vault methodology Develop and optimize data pipelines using SQL and Python Work with tools like Databricks and dbt to build scalable data transformation workflows Ensure data quality, consistency, and compliance, especially within banking-related use cases Experience in requirements management Experience in coordination with source systems Experience with data modeling in a Data Warehouse environment: Focus on Data Vault Good German and English language skills Databricks experience is nice to have Experience with dbt (data build tool) is an advantage Experience with SQL (as a query language) and Python is an advantage Banking experience is an advantage Renowned client Remote work Ihr Kontakt Ansprechpartner Florian Pracher Referenznummer 863466/1 Kontakt aufnehmen E-Mail: florian.pracher@hays.at Anstellungsart Freiberuflich für ein Projekt
Give it a try and learn what the market has to offer – our services are free of charge, non-binding and discreet! We look forward to hearing from you. Design, build, and optimize batch data pipelines for internal tool use cases Develop efficient Spark SQL transformations for large-scale datasets Use Python for data processing, orchestration, and automation Create and maintain data models (facts, dimensions, aggregates) with clear grain and metric definitions Ensure data quality and correctness, including handling late data, duplicates, and adjustments Implement validation, data quality checks, and reconciliation logic Work with business stakeholders to gather requirements, define metrics, and translate needs into pipelines Collaborate with infrastructure teams on standards, performance tuning, and best practices Bachelor oder Master degree in a technical field or an equivalent qualification Experience in data engineering or a related field Strong proficiency in Spark SQL for large-scale data transformations Solid Python skills for data processing and pipeline development Strong understanding of data modeling (fact tables, dimensions, grain, SCDs) Hands-on experience building and maintaining batch pipelines in production High attention to detail with a strong focus on data quality and metric integrity Ability to communicate clearly with non-technical stakeholders and translate business needs into data solutions Remuneration in the most attractive collective agreement in the industry Annual leave entitlement of 30 days Generous working time account with the possibility to pay overtime Subsidization of direct insurance (as company pension scheme) Ihr Kontakt Ansprechpartner Kristina Meng Referenznummer 863942/1 Kontakt aufnehmen E-Mail: kristina.meng@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Informatik, Software Engineering, Computer Science oder vergleichbar Praktische Implementierungsfähigkeit in C++ Berufserfahrung in den Bereichen Architektur/ Design, Tests, Build(CMake) und/ oder fortlaufende Integration von Software (CI) Kenntnisse in Anwendung obengenannter Tools Erfahrung im Bereich Autonom, Guidance, Obstacle Aviodance (2D/3D), SDF oder vergleichbare Themen Interesse an moderner Softwareentwicklung Gute Deutsch- und Englischkenntnisse Beritschaft zu gelegentlichen internationalen Dienstreisen Was wir Ihnen bieten: Einen festen Arbeitsvertrag nach DGB/GVP-Tarifvertrag Eine übertarifliche Vergütung, zzgl.
Ihre Aufgaben: Aufsetzung, Wartung und kontinuierliche Optimierung der Toollandschaft für die Softwareentwicklung Ausbau und Verbesserung von CI/CD-Pipelines sowie der zugrunde liegenden Entwicklungsinfrastruktur Konzeption und Umsetzung von Software-Designs und Architekturelementen zur Reduzierung von Komplexität Unterstützung der Entwicklungsteams bei der Nutzung und Weiterentwicklung der CI/CD-Toolchain Sicherstellung der Einhaltung von Zeit-, Qualitäts- und Kostenvorgaben bei der Aufgabenbearbeitung Enge Abstimmung im Entwicklungsteam zu Aufgaben, Herausforderungen und Workpackages Ihr Profil: Abgeschlossenes Hochschulstudium der Informatik oder eine vergleichbare Qualifikation Erste einschlägige Berufserfahrung im IT- oder Softwareumfeld Kenntnisse in der Systemadministration oder im Betrieb von Entwicklungsinfrastrukturen Erfahrung in der Arbeit mit agilen Methoden im Softwareentwicklungsumfeld Teamfähigkeit sowie eine strukturierte und eigenverantwortliche Arbeitsweise Kommunikationsstärke im Austausch mit Entwicklungsteams und Schnittstellen Was wir Ihnen bieten: Einen festen Arbeitsvertrag nach DGB/GVP – Tarifvertrag Eine übertarifliche Vergütung zzgl.
Für unseren Standort in Wien suchen wir zum nächstmöglichen Zeitpunkt einen motivierten Design Engineer (m/w/d) für den Bereich Powertrain. Tätigkeiten Konstruktion im Bereich Powertrain für militärische NutzfahrzeugeEntwicklung technischer Konzepte nach Normen, Gesetzen und LastenheftKonstruktion und Dimensionierung von BauteilenErstellung technischer Zeichnungen mit CATIA V5 und termingerechte DokumentationÄnderungsmanagement und FreigabeprozessZusammenarbeit im interdisziplinären EntwicklungsteamErstellung und Bewertung von Lastenheften, Abstimmung mit Systemlieferanten bis zur FreigabeMitwirkung bei Prüfungen und Erarbeitung von Prüfspezifikationen Profil Abgeschlossene Ausbildung (TU/FH) Maschinenbau oder KFZ-TechnikMehrjährige Erfahrung in der Konstruktion/Design EngineeringKenntnisse in NutzfahrzeugtechnikSehr gute CATIA V5- und MS Office-Kenntnisse, idealerweise auch Siemens Team CenterErfahrung im ProjektmanagementTeamgeist, schnelle Auffassungsgabe, eigenständige ArbeitsweiseSehr gute Deutsch- und EnglischkenntnisseFallweise Reisebereitschaft Benefits Bei entsprechenden Qualifikationen bieten wir ein Jahresbruttogehalt von EUR 63.000,- (Überzahlung je nach Qualifikation und Erfahrung möglich)Wir zahlen eine MobilitätspauschaleBerufliche Weiterentwicklung ist uns wichtig – deshalb bieten wir dir individuelle Fortbildungsmöglichkeiten in unserem efinio AusbildungszentrumDu arbeitest in einem familiären Team mit flachen Hierarchien und einer offenen Du-KulturWir bieten flexible Arbeitszeiten und Home-Office zur Förderung der Work-Life-BalanceRegelmäßige Teamaktivitäten wie z.B.: Kartfahren sorgen für gemeinsamen Spaß außerhalb des Arbeitsalltags Zusätzliche Information (intern) https://efinio.bewerberportal.at/job/254957?
Tätigkeiten Weiterentwicklung und Optimierung eines technischen Monitoring- und KontrollsystemsKonzeption, Design und Implementierung von Software-ModulenIntegration, Inbetriebnahme und Test von SystemkomponentenErstellung und Pflege technischer DokumentationenUmsetzung von Anwendungen für sicherheitskritische Systeme unter Einhaltung definierter ProzesseMitarbeit in einem erfahrenen, interdisziplinären Team Profil Abgeschlossene technische Ausbildung (HTL, FH oder Universität) mit IT-SchwerpunktSehr gute Programmierkenntnisse in C++ und Java wünschenswertMehrjährige Erfahrung in der Entwicklung von Java- und J2EE-Anwendungen vorteilhaftVertraut mit aktuellen Java-Technologien und Frameworks sowie gängigen Tools wie Ant oder JenkinsErfahrung mit Datenbanksystemen wie Oracle und PostgreSQLKenntnisse in CORBA und gRPC von VorteilGute Englischkenntnisse in Wort und SchriftTeamorientierte Arbeitsweise und ausgeprägte Kommunikationsfähigkeit Benefits Attraktives Jahresbruttogehalt von EUR 67.200,- (Überzahlung je nach Qualifikation und Erfahrung möglich)Mobilitätspauschale - Die Fahrtkosten für öffentliche Verkehrsmittel auf dem Weg zum und vom Arbeitsplatz werden von uns übernommenBerufliche Weiterentwicklung ist uns wichtig – deshalb bieten wir Dir individuelle Fortbildungsmöglichkeiten in unserem efinio AusbildungszentrumDu arbeitest in einem familiären Team mit flachen Hierarchien und einer offenen Du-KulturWir bieten flexible Arbeitszeiten und Home-Office zur Förderung der Work-Life-BalanceRegelmäßige Teamaktivitäten wie z.B.: Kartfahren sorgen für gemeinsamen Spaß außerhalb des Arbeitsalltags Zusätzliche Information (intern) https://efinio.bewerberportal.at/job/264074?