YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
YOUR TASKS: Perform a fine-tuning of the wind turbine control system parameters to ensure both stability and best optimization results for the different product configurations and power modes Development and conception of new control functions to improve wind turbine as well as wind farm performance in terms of load reduction and power capture increase Investigate and analyze complex control issues in the fleet and develop corrective actions in close cooperation with various departments in an international environment Collaborate with cross-functional teams to fulfill Design Failure Mode and Effect Analysis for a new control function Collaborate with the modeling and best simulation of the key subsystems, sensors, pitch and yaw actuators in the wind turbine as well as flow effects at wind farm YOUR PROFILE: MSc /PH.D. degree in Mechanical, Control, Aerospace or Electrical Engineering field Knowledge on Control Design Techniques and Matlab/Simulink Required English (C1), desirable: German , Spanish 3+ years of proven experience Availability to travel YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location Nordex adheres to a policy of equal employment opportunity.
YOUR TASKS: Development and design of main converter power stack. From prototype to series production. Concept design, detailed design, validation and industrialization of power stack for turbine main converter.
Review civil-related contract elements and prepare quotations for civil design and works. Act as the expert interface between Hitachi, clients, and contractors. Manage external civil design partners and handle internal design tasks.
YOUR TASKS Design, develop, and maintain full-stack applications (C#, Python, ASP.NET, SQL) to support and improve internal load calculation workflows.
YOUR TASKS Design, develop, and maintain full-stack applications (C#, Python, ASP.NET, SQL) to support and improve internal load calculation workflows.
Responsibilities: Development, monitoring and improvement of engineering quality processes, methods, procedures and relevant quality KPICoordination, reviewing for consistency and assist in writing of all additional processes, procedures and standards owned by the Design Organisation; particular contribution to definition of engineering standardsDevelopment and monitoring of quality criteria of engineering deliverables, design documents, checklists and similarCreation of interface documents required for control of engineering services suppliers (DOID, DO-DO agreements)Planning and execution of internal and external audits to ensure compliance to the DOH and its Design Management System (Process Audits, Product Audits, engineering services suppliers audits)Contribution, planning and support to audits performed by entities independent/external to the Design Organisation (EASA, LBA, HISM)Support of root cause analysis for internal and external engineering quality issuesActive participation in continuous improvement processes and lessons learnedCreation and coordination of Supplier Quality Control Plans, including management of alternativesSupport Supply Chain Quality with audits of manufacturing suppliersContribution to Aircraft Program Milestones Development GatesSupport of risk management activitiesPlanning and execution of training sessions on quality tools, practices and proceduresSupport to engineering trainings Requirements: Good understanding of quality principlesGood understanding of engineering quality aspects of an aircraft OEMPreferably Engineering degree (BA Eng/Sc) in aeronautics / aviation or mechanical or quality degree> 3 year of professional expertise in aircraft industry or in relevant adjacent fieldBasic knowledge of airframe certification requirements, design criteria, materials, methods and toolsNew aircraft development experience would be a plusAbility to prioritise, manage and execute multiple simultaneous tasks What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
Minimum qualification: Experienced in designing kinematic and mechatronic system, possessing knowledge of automatic system planning. (Pneumatic system design, servo control mechanism, robust structure.)Experienced in method of machining, tolerance analysis and user-friendly design.Familiar with CAD and drawing PDM tool (SolidWorks, Inventor etc.).Familiar with FEA analysis.Good ERP concept and BOM maintenance experience.Fluent in English speaking and writing.More than 3 years working experience Preferred qualification: Experience of serving at similar position of semiconductor process equipment industry.Having the fact to work with software, electrical department to complete a design project.Experience to work with OEM/ODM supplier.Basic concept of thermal conduction.
Minimum qualification: Experienced in designing kinematic and mechatronic system, possessing knowledge of automatic system planning. (Pneumatic system design, servo control mechanism, robust structure.)Experienced in method of machining, tolerance analysis and user-friendly design.Familiar with CAD and drawing PDM tool (SolidWorks, Inventor etc.).Familiar with FEA analysis.Good ERP concept and BOM maintenance experience.Fluent in English speaking and writing.More than 3 years working experience Preferred qualification: Experience of serving at similar position of semiconductor process equipment industry.Having the fact to work with software, electrical department to complete a design project.Experience to work with OEM/ODM supplier.Basic concept of thermal conduction.
Review civil-related contract elements and prepare quotations for civil design and works. Act as the expert interface between Hitachi, clients, and contractors. Manage external civil design partners and handle internal design tasks.
YOUR TASKS: Develop solutions on a leading-edge cloud based platform for managing and analyzing large datasets. Design, develop and deploy digital solutions ensuring the software development life cycle in an agile setup. Create technical documentation.
Your Tasks Technical and commercial preparation of quotations Internal quotation management Development of project schedules Processing of quotations with customer and in coordination with technical and sales Machine design and specification of technologies Review and evaluation of customer specifications Technical risk assessment Clarification of regional and legal requirements Support in the preparation of TCO calculations Ensuring conformity with standards Preparation and execution of customer presentations Recording building dimensions, project clarification in the offer phase Your Qualifications Several years of professional experience in technical sales in mechanical, electrical and plant engineering, preferably in the food/beverage industry Very good data processing skills (MS Office/MS Project), SAP knowledge is an advantage Fluent in English required, French is an advantage Goal-oriented and structured way of working Ability to work in a team, assertiveness and adequate manners Efficient time management and flexible work assignment according to project requirements Willingness to travel internationally Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Ikeja ǀ Lagos ǀ Nigeria
YOUR TASKS: Develop solutions on a leading-edge cloud based platform for managing and analyzing large datasets. Design, develop and deploy digital solutions ensuring the software development life cycle in an agile setup. Create technical documentation.
Your Tasks Technical and commercial preparation of quotations Internal quotation management Development of project schedules Processing of quotations with customer and in coordination with technical and sales Machine design and specification of technologies Review and evaluation of customer specifications Technical risk assessment Clarification of regional and legal requirements Support in the preparation of TCO calculations Ensuring conformity with standards Preparation and execution of customer presentations Recording building dimensions, project clarification in the offer phase Your Qualifications Several years of professional experience in technical sales in mechanical, electrical and plant engineering, preferably in the food/beverage industry Very good data processing skills (MS Office/MS Project), SAP knowledge is an advantage Fluent in English required, French is an advantage Goal-oriented and structured way of working Ability to work in a team, assertiveness and adequate manners Efficient time management and flexible work assignment according to project requirements Willingness to travel internationally Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Ikeja ǀ Lagos ǀ Nigeria
Job description / Your role: Take full responsibility for the development of our cybertronic products, typically comprising one or more electric actuators, electronics, mechanical structures, software, and harnesses Supervise and coordinate all engineering activities required for product development, qualification, and industrial manufacturing Lead system engineering efforts for integrated mechanism products, ensuring performance and compliance across subsystems Define and manage system-level performance budgets (e.g. mass, power, thermal) Prepare comprehensive technical documentation, including design descriptions, development schedules, and test specifications Support product testing and qualification processes from prototype to flight-ready hardware Contribute to the Simultaneous Engineering process by collaborating with industrial process engineering teams to scale production Qualification Checklist: University degree (or equivalent) in engineering, aerospace, mechatronics, or a related technical field Professional experience in mechanism or actuator development Industry experience in the space sector, particularly with space mechanisms and electromechanical actuators Proficiency in working with technical requirements, including authoring, reviewing, and interpreting specifications Strong conceptual thinking and analytical problem-solving skills Ability to work effectively in multidisciplinary teams Fluency in English (written and spoken) Bonus Qualifications: Familiarity with numerical engineering tools used for structural, thermal, or motion analysis Initial experience in technical leadership or coordination roles Knowledge of material selection and manufacturing processes suitable for space applications Profound understanding of the full engineering workflow required to design, develop, and qualify space-grade actuators and electronics Extensive professional experience in mechanism or actuator development Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if requiredBe part of a supportive team with room to grow as we scale together Ihr Ansprechpartner Dr.
Werde Teil von TECCON, dem Heart of Engineering und entwickle die Zukunft mit uns. <ul> <li>Design and develop aircraft structural modifications to support the installation of flight test sensors and test equipment (e.g., ice probes, trailing cones, flutter exciters, booms, antennas, and racks).
Zusätzlich sind wir an unseren Standorten in Hamburg, Bremen und Augsburg jederzeit für Sie da.Ihr Anforderungsprofil: Sie haben ein erfolgreich abgeschlossenes Studium im Bereich Ingenieurwesen, Elektrotechnik, Nachrichtentechnik oder verfügen über eine vergleichbare QualifikationSie verfügen über mind. 3-jährige relevante Berufserfahrung Grundkenntnisse in SAP wünschenswertKenntnisse im Bereich der analogen und digitalen SchaltungstechnikKenntnisse im Requirements-Engineering wünschenswertErfahrung im Umgang mit CAE-Tools, bevorzugt Mentor Xpedition (DxDesigner, CES, IO-Designer, xPCB, Layout) od. ähnlichen Hardware-ToolsKenntnisse in der Schaltungssimulation wünschenswertMentor HyperLynx (SI, PI, DRC), ADS (Advanced Design System v.
Dienen Sie als primärer Ansprechpartner für alle AutoCAD-bezogenen Themen innerhalb des internen TeamsPflegen Sie eine kontinuierliche Kommunikation mit den Entwicklungsteams, um neue Anforderungen und Funktionen für Engineering-Anwendungen und -Systeme zu identifizierenFühren Sie neue Funktionen und Features in die Architektur des Engineering-Design-Tools ein und integrieren Sie dieseImplementieren Sie neue Funktionen, Module und Features und stellen Sie dabei Tests und Dokumentation sicherUnterstützen Sie die Entwicklung und Konfiguration in der AutoCAD-Umgebung und fungieren Sie als kompetente Anlaufstelle für Kunden in Bezug auf die Anwendung Ein abgeschlossenes Studium in Maschinenbau, Informatik, Mathematik, Elektrotechnik, Physik oder einem verwandten Bereich; fundierte Erfahrung als AutoCAD-Spezialist ist von VorteilFundierte Erfahrung in der Arbeit mit agilen Entwicklungsteams sowie in der Zusammenarbeit mit Prozessspezialisten und Solution ArchitectsFundierte Kenntnisse der Autodesk-Produkte, insbesondere AutoCAD und dessen DerivateErfahrung in der Entwicklung von CAD-Schnittstellen für Anwendungen wie Creo, NX und AutoCADVersiert im Umgang mit DevOps-Tools, insbesondere Azure DevOps; Kenntnisse in BIM und CAD-Datenformaten sind von VorteilFließende Englischkenntnisse in Wort und Schrift, Deutschkenntnisse auf B1-Niveau; zusätzliche -Sprachkenntnisse sind von Vorteil Sie profitieren an dem exklusiven Zugang zu interessanten Unternehmen und spannenden Projekten in Zusammenarbeit mit Hays als einem soliden und stabilem PartnerVergütung im Tarifvertrag der Branche (IGZ-DGB)Jährlicher Urlaubsanspruch von 30 TagenArbeitszeitkonto mit der Möglichkeit zur Auszahlung von Überstunden oder FreizeitausgleichProfessionelle und vertrauensvolle Zusammenarbeit Ihr Kontakt Ansprechpartner Bastian Nusko Referenznummer 854697/1 Kontakt aufnehmen Telefon:+49-(0)911-21648104 E-Mail: bastian.nusko@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Wasserstoff, Stickstoff und Sauerstoff Fachliche Führung und Koordination technischer Konzepte: Vorbereitung, Prüfung und Bewertung von Angebots- und Ausschreibungsunterlagen sowie Lieferanten- und Kundenangeboten Erstellung, Prüfung und Freigabe von PFDs und P&IDs sowie relevanter technischer Unterlagen Technische Schnittstellenverantwortung gegenüber Kunden, Lieferanten, Projektpartnern und internen Fachbereichen; Sicherstellung der Qualität und Konsistenz aller Engineering-Ergebnisse Unterstützung von Design Reviews, Risk Assessments und HAZOP-Studien Mentoring und fachliche Unterstützung von Ingenieurinnen und Ingenieuren sowie aktive Förderung von Engineering-Standards und Best Practices Ihre Qualifikationen Hochschulabschluss (Diplom / Master / Bachelor) in Verfahrenstechnik, Chemiewesen, Maschinenbau oder einer vergleichbaren technischen Fachrichtung Mindestens 8–10 Jahre relevante Berufserfahrung in der Planung von Anlagen, idealerweise im Bereich technischer Gase oder vergleichbarer Industrien Sehr gute Kenntnisse der einschlägigen Normen und Regelwerke im Anlagenbau (z.
Proactive participation in all phases of software development from feasibility studies through design,development, testing and bug fixing and maintenanceCollaboration within the Scrum-TeamsIndependent interaction with internal framework manufacturersBased on requirements and models, definition of software architecture, design and specifications, ultimately leading to implementationParticipation in the definition of work packages, their estimation and planning in a sprint-based agile environmentAdherence to a software development process including contribution to written deliverables and documentation Degree in a software related field such as software or electrical engineering or similarHands-on experience as Software Engineer, preferred in the regulated environment such as the medical device industryYears hands- on experience with C++ and Linux from the last project or positionStrong with Linux DockersExperience with CAN busSoftware architecture would be advantageous Internal career opportunities World-renowned biotech company Ihr Kontakt Referenznummer 865145/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Responsibilities Contribution to the development of safety-critical embedded real-time software for aircraft systems according to RTCA/DO-178B guidelines (Level A to Level D)Autonomous working according to company’s and project-specific processesSupport the tailoring of development processes to project-specific needsSupport the specification of software high-level requirementsDevelopment of software low-level requirementsSoftware programming in C programming languageSoftware debugging, integration, and analysisSupport the design of internal and external interfacesDesign/adaptation of existing solutions for new applications by using dedicated/standardized toolsSupport the definition of “Statement of Work' to be presented to potential suppliersConfiguration control/change management of all items produced using applicable tools (e.g.
Register with us and reap the benefits of interesting job offers that match your skills and experience. Provide design input to Engineering Team during the design reviews Proactively propose Value Engineering solutions in order to optimize the scopePre-align with Technical Service Team regularly on the new systems to be implemented Develop pre commissioning check list and provide Commissioning scope to Procurement Team Develop and set into motion innovative plans together with project controls team that reduce budget And/or?
MM und PP (PM/QM/SD von Vorteil) Sehr gute Kenntnisse in Requirements Engineering, funktionalem Design und Testmanagement Tiefgehendes Verständnis von SAP-Datenmodellen und Stammdatenprozessen mit Fokus auf minimale Customizing-Anteile Erfahrung im IT-Projektmanagement inkl.
Register with us and reap the benefits of interesting job offers that match your skills and experience. Provide design input to Engineering Team during the design reviews Proactively propose Value Engineering solutions in order to optimize the scope Pre-align with Technical Service Team regularly on the new systems to be implemented Develop pre commissioning check list and provide Commissioning scope to Procurement Team Develop and set into motion innovative plans together with project controls team that reduce budget And/or?
Dienen Sie als primärer Ansprechpartner für alle AutoCAD-bezogenen Themen innerhalb des internen Teams Pflegen Sie eine kontinuierliche Kommunikation mit den Entwicklungsteams, um neue Anforderungen und Funktionen für Engineering-Anwendungen und -Systeme zu identifizieren Führen Sie neue Funktionen und Features in die Architektur des Engineering-Design-Tools ein und integrieren Sie diese Implementieren Sie neue Funktionen, Module und Features und stellen Sie dabei Tests und Dokumentation sicher Unterstützen Sie die Entwicklung und Konfiguration in der AutoCAD-Umgebung und fungieren Sie als kompetente Anlaufstelle für Kunden in Bezug auf die Anwendung Ein abgeschlossenes Studium in Maschinenbau, Informatik, Mathematik, Elektrotechnik, Physik oder einem verwandten Bereich; fundierte Erfahrung als AutoCAD-Spezialist ist von Vorteil Fundierte Erfahrung in der Arbeit mit agilen Entwicklungsteams sowie in der Zusammenarbeit mit Prozessspezialisten und Solution Architects Fundierte Kenntnisse der Autodesk-Produkte, insbesondere AutoCAD und dessen Derivate Erfahrung in der Entwicklung von CAD-Schnittstellen für Anwendungen wie Creo, NX und AutoCAD Versiert im Umgang mit DevOps-Tools, insbesondere Azure DevOps; Kenntnisse in BIM und CAD-Datenformaten sind von Vorteil Fließende Englischkenntnisse in Wort und Schrift, Deutschkenntnisse auf B1-Niveau; zusätzliche -Sprachkenntnisse sind von Vorteil Sie profitieren an dem exklusiven Zugang zu interessanten Unternehmen und spannenden Projekten in Zusammenarbeit mit Hays als einem soliden und stabilem Partner Vergütung im Tarifvertrag der Branche (IGZ-DGB) Jährlicher Urlaubsanspruch von 30 Tagen Arbeitszeitkonto mit der Möglichkeit zur Auszahlung von Überstunden oder Freizeitausgleich Professionelle und vertrauensvolle Zusammenarbeit Ihr Kontakt Ansprechpartner Bastian Nusko Referenznummer 854697/1 Kontakt aufnehmen Telefon:+49-(0)911-21648104 E-Mail: bastian.nusko@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Verantwortung für die Planung und Steuerung von Softwareprojekten – von der Anforderungsanalyse bis zur UmsetzungKonzeption und Entwicklung moderner Softwarearchitekturen sowie Bewertung technischer SystemkomponentenAnalyse bestehender Systeme mit Fokus auf Effizienz, Stabilität und SkalierbarkeitEnge Zusammenarbeit mit Hardwareentwicklung, Qualitätssicherung und weiteren technischen FachbereichenDokumentation und Steuerung aller relevanten Prozessschritte entlang des Entwicklungszyklus Abgeschlossenes Studium im Bereich Informatik, Elektrotechnik, Informationstechnik oder eine vergleichbare technische QualifikationFundierte Berufserfahrung in der Teamführung Kenntnisse aus der AutomobilindustrieFundierte Kenntnisse in Software-Design, Entwicklungswerkzeugen und modernen Engineering-MethodenSehr gute Programmierkenntnisse in C/C++; idealerweise Erfahrung mit C# sowie Tools wie Git/GitLabSehr gute Deutschkenntnisse Verantwortungsvolle Position mit großem Gestaltungsspielraum und abwechslungsreichen AufgabenArbeiten in einem internationalen Unternehmensumfeld mit modernen StrukturenIhr Vorteil über Hays: ein transparenter Bewerbungsprozess, schnelles Feedback und Beratung während des Bewerbungsprozesses Gehaltsinformationen Je nach Qualifikation und Berufserfahrung ca. 90.000 Euro Ihr Kontakt Ansprechpartner Ivonne Leuwer Referenznummer 861706/1 Kontakt aufnehmen E-Mail: ivonne.leuwer@hays.de Anstellungsart Festanstellung durch unseren Kunden
Job description / Your role: Take full ownership for the mechanical and thermal design of LEOspace products Supervise and coordinate all related engineering activities, including mechanical design, structural analysis, thermal design, and thermal analysis Lead and support the mechanical and thermal testing and qualification of space hardware Prepare comprehensive technical documentation, including design descriptions, development schedules, and test definitions Conduct preliminary assessments of mechanical and thermal robustness within an agile development framework Support system-level testing and qualification processes Contribute to our Simultaneous Engineering approach by collaborating with industrial process engineering teams to scale the production of mechanical and thermal systems Qualification Checklist: University degree (or equivalent) in engineering, aerospace, or a related technical field Experience in the space industry, with a focus on mechanical and thermal system design Demonstrated expertise in mechanical and/or thermal analysis, with knowledge of industry best practices Familiarity with material and process selection for space applications Strong teamwork and collaboration skills Fluency in English (written and spoken) Bonus Qualifications: Strong conceptual thinking and problem-solving skills Practical experience with numerical engineering tools for mechanical and thermal analysis in space systems Initial experience in leadership or project coordination roles Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if required Ihr Ansprechpartner Dr.
Your Profile Bachelor's degree in Engineering, Physics, Materials Science, or related technical discipline; Master's degree preferred.7+ years of experience in application engineering, product engineering, or technical customer support for medical, optical, or high-reliability components.10+ years of experience supporting medical device OEMs or optical/photonics customers preferred.Strong experience with customer interaction, specification management, and technical communication.Ability to interpret drawings, tolerances, and material/process requirements; hands-on lab and testing experience preferred.Experience with cross-functional collaboration (Sales, Engineering, Product Management, Quality, Operations).Excellent written/verbal communication, presentation skills, and problem-solving capability.Experience supporting verification, validation, and application testing preferred.Some familiarity with medical product standards, regulatory documentation expectations, and design control practices.Experience with DOE, statistical tools, and structured problem-solving (e.g., 8D) preferred.Experience in global, matrixed organizations preferred.Must be able to read, write, and speak EnglishEffective verbal and written communication skills.Self-motivated and results oriented.Due to the nature of work performed at this facility, US Person status may be required.
Dein Platz bei uns: Du unterstützt die VAVE‑ und Engineering‑Teams bei Design‑to‑Cost - und Engineer‑to‑Cost -Aktivitäten in laufenden Projekten. Du wirkst an VAVE‑Analysen, Kostenaufschlüsselungen und Benchmarking für Komponenten, Baugruppen und Produktlinien mit.
Mein Arbeitgeber Unser Mandant ist ein weltweit führendes Unternehmen für Lebensmittelverarbeitungs- und VerpackungslösungenMit über 23.000 Mitarbeitenden in mehr als 85 Ländern setzt unser Mandant auf verantwortungsvolle Branchenführung und einen nachhaltigen GeschäftsansatzMit dem Motto Protects what's good spiegelt das Unternehmen seine Vision wider, Lebensmittel überall sicher und verfügbar zu machenVielfältige Herausforderungen mit umfangreichen Entwicklungs- und Trainingsmöglichkeiten in einem globalen UmfeldInnovationskultur, in der Ingenieurskunst sichtbare Ergebnisse schafftGleichberechtigte Beschäftigungserfahrung, die Vielfalt und Unterschiede wertschätztMarktgerechte Vergütung und Benefits mit flexiblen Arbeitsmodellen Experte für Lösungen in der Flüssiglebensmittelindustrie (Milchprodukte, Getränke, Fertigprodukte etc.)Projektmanagement von LO-L2 Projekten inkl. laufender Reviews (Design-, Installations-, Betriebs- und Leistungsqualifikation)Verantwortung für technische Lösungen im Design, Verkauf, Installation und Inbetriebnahme von ProzesssystemenDetailengineering: Dimensionierung und Auswahl von Komponenten, Modulen und kompletten AnlagenErstellung von Engineering-Dokumenten (P&IDs, PFD, HRA, SRA)Bearbeitung von Designspezifikationen, Dimensionierung und Anordnung von Prozessequipment und LösungenDefinition von Linienfunktionen, Erstellung technischer Beschreibungen und Prozess-FunktionsspezifikationenErstellung von Projektdokumentationen inkl.
Register with us and reap the benefits of interesting job offers that match your skills and experience. Provide design input to Engineering Team during the design reviewsPRe-align with Technical Service Team regularly on the new systems to be implementedDevelop pre commissioning check list and provide Commissioning scope to Procurement TeamDevelop and set into motion innovative plans together with project controls team that reduce budget and/or condense schedule (Value Engineering and time/cost impact mitigation) to keep milestonesand costsWork with Procurement team to create biddable commissioning packages and verify contractor bids against cost/schedule estimates, provide input in the Scope of Works and provide input for contractual clauses from design submittal to PO releaseInterface with Engineering Team, Construction Team, Technical Services team, Manufacturing and every stakeholder involved in the projectEnforce and maintain high quality standards for commissioning by contractorsIn-depth knowledge and experience in commissioning complex factory systems including mechanical dry (HVAC, dust collection, exhaust, etc.), process (water treatment, natural gas, liquid Nitrogen, etc.) and utility systems (compressed air, domestic water, sewage, etc.)
Mein Arbeitgeber 35-Stunden Woche Erstellung von Spezifikations - und Designdokumenten für (Sub-)Systeme im Kontext der Digitalen Infrastuktur der militärischen FahrzeugenErstellen von technischen Konzepten mit Bezug auf die Digitale InfrastrukturAbstimmung mit Stakeholdern und anderen Entwicklungsdomänen zu verschiedenen Design-EntscheidungenAbstimmung mit dem Projektkernteam und der Fachabteilung zur technischen UmsetzungModellierung in SysML zur Unterstützung der Spezifikation / des Designs (u.a.
Benefits Attraktive Vergütung gemäß GVP Tarif inklusive Urlaubs und WeihnachtsgeldEinsatz in einem modernen Entwicklungsumfeld mit agilen Teams und klaren StrukturenNach Einarbeitung Möglichkeit zu mobilem Arbeiten an bis zu vier Tagen pro Woche nach individueller AbstimmungPersönliche Betreuung durch einen festen Ansprechpartner während des gesamten Einsatzes Aufgaben Zentrale Ansprechperson für alle AutoCAD Themen innerhalb des internen Engineering UmfeldsAufnahme, Klärung und Abstimmung von Anforderungen mit Product Ownern, Business Ownern und EntwicklungsteamsWeiterentwicklung der Engineering Design Tools durch Integration neuer Funktionen und FeaturesUmsetzung, Test und technische Dokumentation neuer Module und Erweiterungen im AutoCAD UmfeldPflege und Dokumentation der Arbeitsergebnisse in Azure DevOps sowie Mitarbeit in agilen Entwicklungsprozessen Profil Abgeschlossenes Studium im Bereich Maschinenbau, Elektrotechnik, Informatik, Mathematik, Physik oder einer vergleichbaren FachrichtungMindestens fünf Jahre Berufserfahrung als AutoCAD Spezialist oder in einer vergleichbaren Rolle im Engineering oder IT UmfeldSehr gute Kenntnisse in Autodesk AutoCAD sowie Erfahrung mit angrenzenden CAD Systemen wie Creo oder NXErfahrung in agilen Entwicklungsteams und im Umgang mit DevOps Tools, idealerweise Azure DevOpsSehr gute Englischkenntnisse in Wort und Schrift sowie Deutschkenntnisse auf mindestens B1 NiveauAnalytische Arbeitsweise, technisches Verständnis und ausgeprägte Kommunikationsfähigkeit Unsicher, ob die Stelle zu Ihnen passt?
BPMN 2.0)Ausgeprägte Kommunikationsfähigkeit, eigenständiges PM-Handwerk (Planen, Steuern, Tracken) und hohe Verlässlichkeit in der UmsetzungAusgeprägte Fähigkeiten in Workshop-Design und Moderation sowie in präziser, strukturierter Kommunikation (fließend in Englisch sowie Deutsch) Abwechslungsreiche Tätigkeit in einem renommierten UnternehmenAnspruchsvolle und abwechslungsreiche Aufgaben in einer zukunftsträchtigen und innovativen BrancheAussicht auf ProjektverlängerungBetreuung im gesamten BewerbungsprozessBetreuung im laufenden Projekt durch unser Team Ihr Kontakt Ansprechpartner Christina Zauzig Referenznummer 861782/1 Kontakt aufnehmen Telefon:+49-(0)228-96965241 E-Mail: christina.zauzig@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Mitarbeit in einem modernen, Cloud native Engineering-Team mit Fokus auf DevOps, Automation und CI/CD. Ihre Aufgaben: Design und Implementierung skalierbarer Software- und Cloud-Services in Zusammenarbeit mit Architektur- und Engineering-Teams Umsetzung von Cloud-Engineering-Aufgaben innerhalb agiler Sprint-Zyklen Aufbau von cloud native Lösungen für Neukunden auf Basis von Azure IaaS & PaaS Entwicklung automatisierter Cloud-Umgebungen, CI/CD-Pipelines und unterstützender Frameworks Präsentation von Architekturen gegenüber unterschiedlichen Stakeholdern (Entwickler bis C-Level) Beratung von Führungskräften, Endanwendern und technischen Teams in Technologieauswahl, Best Practices und Cloud-Vorteilen Unterstützung bei Bereitstellung, Anpassung und Optimierung von Cloud-Ressourcen Durchführung von Upgrades, Fehlerbehebung und operativer Support im Umfeld Azure Mitwirkung in technischen Diskussionen zu Architektur, Automatisierung und Programmierung Ihr Profil: Mehrjährige Erfahrung im Entwerfen, Implementieren und Unterstützen von Azure-Umgebungen (IaaS & PaaS) Sehr gutes Verständnis von Cloud-Automation, CI/CD und Infrastruktur als Code Erfahrung mit Tools wie Terraform, Ansible, Kubernetes, Jenkins, Docker Kenntnisse in Skriptsprachen und Automatisierung (Python, YAML, Go etc.)
Registrieren Sie sich und freuen Sie sich auf interessante und passende Positionen und Projekte. Design von Leiterplattenlayout mit SMD fine-pitch, BGA, FBGA und TH-TechnologieDesign von Multilayer-Platinen mit impedanzkontrollierten Leitungen für HF-SignaleEntwicklung und Integration von Elektronikkomponenten/-Systeme für die Videoverarbeitung und Systemkommunikation (z.B.
Ihre Aufgaben: Umsetzen von APQP-Elementen (Control Plan, Support P-FMEA, SPC) in Zusammenarbeit mit Stakeholdern Vertreten des Quality-Bereichs im Projekt und Planen von Qualitätsaktivitäten Planen, Koordinieren und Durchführen von FAI-Aufgaben (Kick-off, Action Follow-Up) Erstellen und Verfolgen von Prüfplänen und komplexen Prüfanweisungen Agieren als Schnittstelle zwischen Manufacturing Engineering und Design Engineering Unterstützen und Freigeben von Arbeitsplänen und SOIs Teilnehmen an MFT-Runden und Vertreten der Qualitätsbelange Ihr Profil: Abgeschlossenes Studium in Ingenieurwesen, Technischem Studium, Verbundwerkstoffen/Composites oder Qualitätsmanagement (mind.
Contribute to the co-design of automotive radar antennas and radar modulation techniques. Participate in the evaluation and selection of new processor architectures and upcoming hardware generations.
You develop concepts and participate in feasibility studies to meet technical requirementsYou perform and take ownership of specific software development tasks, ensuring reviews using checklists and templatesYou lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designsYou review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trendsYou conduct root-cause analysis of complex issues and provide bug fixes for post-market software releasesYou ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experienceProven experience as a Software Engineer with a strong focus on Rust developmentSolid understanding of Rust's core concepts, including ownership, borrowing, and lifetimesExperience with asynchronous programming in Rust (e.g., using async/await)Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical companyInternational and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
You develop concepts and participate in feasibility studies to meet technical requirements You perform and take ownership of specific software development tasks, ensuring reviews using checklists and templates You lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designs You review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trends You conduct root-cause analysis of complex issues and provide bug fixes for post-market software releases You ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experience Proven experience as a Software Engineer with a strong focus on Rust development Solid understanding of Rust's core concepts, including ownership, borrowing, and lifetimes Experience with asynchronous programming in Rust (e.g., using async/await) Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical company International and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Your Task Provide technical consulting to customers and internal teams on suitable upgrade solutions Prepare technical and commercial proposals tailored to customer requirements Conduct needs analyses and develop upgrade concepts based on customer demands Deliver product presentations and technical trainings for customers and internal stakeholders Support upgrade projects from initial inquiry through implementation Collaborate with Engineering, Product Management, and Service to ensure technical feasibility Monitor market trends and customer needs to identify new business opportunities Your Profile Degree in Engineering, Renewable Energy, or a related technical field 3–5 years of experience in technical sales, project management, or customer consulting, ideally in wind energy or renewables Solid understanding of mechanical and electrical systems or IT and SCADA; knowledge of wind turbines is an advantage Familiarity with process design, KPI tracking, and efficiency tools Excellent communication and presentation skills with strong intercultural awareness; client‑facing experience is an asset Proactive, solution‑oriented mindset with strong analytical and problem‑solving abilities Ability to work cross‑functionally and internationally in a fast‑paced environment Proficiency in MS Office; experience with CRM or ERP systems is beneficial Fluent in English and German; Spanish is a plus YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
As a Network Design Specialist (m/f/d), you will be part of a global team responsible for creating technical network design documentation for onshore wind farms worldwide.
As a Network Design Specialist (m/f/d), you will be part of a global team responsible for creating technical network design documentation for onshore wind farms worldwide.
Durchführung detaillierter Analysen und Anpassungen bestehender Leiterplattenlayouts gemäß ECSS StandardsErstellung eines Design Rule Sets für PBA Layouts nach ECSS-Q-ST-70-12CÜberarbeitung und Optimierung von High-End PCB Layouts (bis zu 16+ Layer, HDI) unter Berücksichtigung von EMV-Anforderungen und Power IntegrityUmsetzung von High-Speed Design Anforderungen (z.B.
Altium Designer, OrCAD, Eagle, KiCad oder vergleichbare ToolsFundierte Kenntnisse der IPC-Standards für Leiterplattenaufbau, Fertigung und Bestückung (z.?
Ihre Aufgaben Coordination with engineering disciplines for FTI requirements such as the FTI parameter listSelection of FTI equipment and sensors in accordance with requirements.Perform the FTI system designSystem laboratory tests and integration activities to verify proper functioningIntegration of FTI equipment onto the aircraft.Troubleshoot deficiencies Ihr Profil Engineering degree or equivalent professional qualification5+ years of job experience in a flight test environment.Expert knowledge of sensors, data acquisition, recording and telemetry systemsFamiliar with Corel Draw Design Software, IADS, and Das Studio.Strong analytical and troubleshooting skillsAutonomous worker and good communicatorVery good written and oral knowledge in English.
Additionally, we offer internal training programs and expert lectures conducted by our project team members, covering topics relevant to quality managers, project managers, design engineers, FEM analysts, test engineers, programmers, and automation specialists. uberi zirnij schrift
You work closely with engineering, quality, and suppliers to analyze bearing behavior and support robust mechanical design. The position is part of an international engineering environment with a strong focus on safety and technical accuracy. YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
You work closely with engineering, quality, and suppliers to analyze bearing behavior and support robust mechanical design. The position is part of an international engineering environment with a strong focus on safety and technical accuracy. YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Waschkaue)Leitung und Mitwirkung in Brownfield-Projekten von Basic Engineering bis InbetriebnahmeErstellung und Steuerung von Budget- und Terminplänen inklusive Projektcontrolling (in Kooperation mit PMO)Ausarbeitung von Beschaffungsbedarfsspezifikationen, technische Angebotsbewertungen und Teilnahme an LieferantenverhandlungenTechnischer Sparringspartner des Gesamtprojektleiters: Verifizierung und Nachverfolgung von Projektzeitplänen, Optimierung von Layout und Design hinsichtlich Prozess-Sicherheit und WartungsfreundlichkeitErstellung, Pflege und Verwaltung technischer Zeichnungen und ProjektdokumentationenAbstimmung mit internen und externen Stakeholdern, inkl.